Abvala Shopping

  Features:   - Charge current switch. -Have Memory mode after power off -For batteries used on Battery Management Systems(BMS) only. -For charging 12V or 24V LiFePO4 batteries. -For activation or maintenance of weak, old and idle batteries. Used to select a mode for charging 12V or 24V Lithium batteries, -Can not repair severely damaged batteries. Not for Lithium and LiFePO4 batteries. -For ordinary lead-acid batteries/maintenance-free batteries  including AGM, GEL, SLA, WET, DEEP CYCLE, EFB,Calcium, etc. Specification: AC input: 100-240 V 50/60Hz Output voltage :12 V / 24 V Output current :12V20A & 24V10A No-load output voltage :27.6V Minimum starting voltage: >7.0V Power and load :MAX 240W Size :158 x90x50mm(6.22 x3.54 x1.97 inches) Suit for :Lithium/LiFePO4/Lead-Acid (AGM,GEL,EFB, MF, FLOODED, VRLA, SLA and Wet batteries..) What to get: 1X 20A Car Battery Charger 1x 3M Extension Power Cord 1x Cable Clip 1x Manual 1x Retail Box Q&A Q1. What is the maximum c...

Full Automatic Car Battery Charger 12V Display Smart Battery Charger Power Puls Repair Chargers Wet Dry Lead Acid Battery S pecification: Material: ABS Voltage: 12V Input voltage: AC 110-220V, 50-60Hz Minimum starting voltage: 8.0V Battery range: 4-100Ah Thermal protection: 65'C+/-5'C Size: 150×85×62mm Comply with standards: CE, FCC, ROHS, CMA Functional protection: short circuit protection, overvoltage protection, reverse connection protection, overcurrent protection, overheating protection Battery type: Most types of lead-acid batteries include calcium, gel and AGM, wet type, EFB, etc. Tip: This charger is only suitable for lead-acid batteries, and it is forbidden to charge lithium batteries!    

  Product introduction : The BSIDE X1 product is a future-oriented electrical tester created by the BSIDE brand designer. The product has a 2.0-inch smart display, and has the test attributes of a voltage detector and a smart multimeter. With the increasing importance of electricity safety, this product will become a necessity in your daily life. At the same time optimize the use of functions and test experience. The sensitivity is adjustable. And added the latest design of “High sensitivity detection mode“( 6V~1000V ) . Main Features: Non-contact and pen shaped desigh,convenient to operate and carry. EBTN ultra-clear display, clear and easy to read. Dual mode operation.(Low sensitivity and High sensitivity) Has Induction dangerous voltage alarm, DC/AC voltage, Resistance, Frequency, Live/Neutral wire distinction, Live Wire Breakpoint Locate, Continuity check, flashlight features etc. This product has a Self-test function at boot time. It can effectively detect whether the product...